Filter
Top Products
Command Reference
30
Cisco IOS Release 12.0(7)T
Use the show csm modem command to display the CSM call statistic information for a specific
modem, for a group of modems, or for all modems. If a slot/port argument is specified, then CSM
call statistics are displayed for the specified modem. If the modem-group-number argument is
specified, the CSM call statistics for all of the modems associated with that modem group are
displayed. If no keyword is specified, CSM call statistics for all modems on the AS5300 are
displayed.
Use the show csm voice command to display CSM statistics for a particular DSP channel. If the
slot/dspm/dsp/dsp-channel or shelf/slot/port argument is specified, the CSM call statistics for calls
using the identified DSP channel will be displayed. If no argument is specified, all CSM call
statistics for all DSP channels will be displayed.
Examples
The following is sample output from the Cisco AS5300 for the show csm voice command:
Router# show csm voice 2/4/4/0
slot 2, dspm 4, dsp 4, dsp channel 0,
slot 2, port 56, tone, device_status(0x0002): VDEV_STATUS_ACTIVE_CALL.
csm_state(0x0406)=CSM_OC6_CONNECTED, csm_event_proc=0x600E2678, current call thru PRI
line
invalid_event_count=0, wdt_timeout_count=0
wdt_timestamp_started is not activated
wait_for_dialing:False, wait_for_bchan:False
pri_chnl=TDM_PRI_STREAM(s0, u0, c22), tdm_chnl=TDM_DSP_STREAM(s2, c27)
dchan_idb_start_index=0, dchan_idb_index=0, call_id=0xA003, bchan_num=22
csm_event=CSM_EVENT_ISDN_CONNECTED, cause=0x0000
ring_no_answer=0, ic_failure=0, ic_complete=0
dial_failure=0, oc_failure=0, oc_complete=3
oc_busy=0, oc_no_dial_tone=0, oc_dial_timeout=0
remote_link_disc=0, stat_busyout=0
oobp_failure=0
call_duration_started=00:06:53, call_duration_ended=00:00:00,
total_call_duration=00:00:44
The calling party phone number = 408
The called party phone number = 5271086
total_free_rbs_timeslot = 0, total_busy_rbs_timeslot = 0,
total_dynamic_busy_rbs_timeslot = 0, total_static_busy_rbs_timeslot = 0,
total_sw56_rbs_timeslot = 0, total_sw56_rbs_static_bo_ts = 0,
total_free_isdn_channels = 21, total_busy_isdn_channels =
0,total_auto_busy_isdn_channels = 0,
min_free_device_threshold = 0