Filter
Top Products
Debug Commands
64
Cisco IOS Release 12.0(7)T
debug vrm control
To display all control messages sent to and received from the DSP, use the debug vrm control
privileged EXEC command. To stop displaying DSP-specific control messages, use the no form of
this command.
[no] debug vrm control
Syntax Description
There are no arguments or keywords used in this command.
Defaults
No default behavior or values.
Command History
Examples
The following example displays DSP-specific control messages going to the VRM:
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size C
*Nov 22 19:17:49.351: content : 0 0 0 1 0 8 0 1 0 4B 0 0 0 0 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size 14
*Nov 22 19:17:49.351: content : 0 0 0 1 0 10 0 1 0 4A 0 1 0 0 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size 1C
*Nov 22 19:17:49.351: content : 0 0 0 1 0 18 0 1 0 5C 0 2 0 2 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size 16
*Nov 22 19:17:49.351: content : 0 0 0 1 0 12 0 1 0 4C 0 3 0 1 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size E
*Nov 22 19:17:49.351: content : 0 0 0 1 0 A 0 1 0 42 0 4 0 0 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size 10
*Nov 22 19:17:49.351: content : 0 0 0 1 0 C 0 1 0 5B 0 5 0 0 0
*Nov 22 19:17:49.351: SEND CONTROL slot 4 tag 1 size E
*Nov 22 19:17:49.351: content : 0 0 0 1 0 A 0 1 0 4E 0 6 FF DA 0
*Nov 22 19:17:51.995: SEND CONTROL slot 4 tag 1 size C
*Nov 22 19:17:51.995: content : 0 0 0 1 0 8 0 1 0 44 0 7 FF DA 0
*Nov 22 19:17:51.995: SEND CONTROL slot 4 tag 1 size C
*Nov 22 19:17:51.995: content : 0 0 0 1 0 8 0 1 0 47 0 8 FF DA 0
*Nov 22 19:17:51.995: SEND CONTROL slot 4 tag 1 size C
*Nov 22 19:17:51.995: content : 0 0 0 1 0 8 0 1 0 44 0 9 FF DA 0
*Nov 22 19:17:51.995: SEND CONTROL slot 4 tag 1 size 1C
*Nov 22 19:17:51.995: content : 0 0 0 1 0 18 0 1 0 5C 0 A 0 2 0
*Nov 22 19:17:51.995: SEND CONTROL slot 4 tag 1 size 1C
Release Modification
12.0(7)T This command was introduced.