Filter
Top Products
Command Reference
34
Cisco IOS Release 12.0(7)T
wait_for_bchan: Indicates whether this (outgoing) call is waiting for a B channel to send the call
out on.
pri_chnl= Indicates which type of TDM stream is used for the PRI connection. For PRI
and CAS calls, it will always be TDM_PRI_STREAM.
tdm_chnl= Indicates which type of TDM stream is used for the connection to the device
used to process this call. In the case of a VoIP call, this will always be set to
TDM_DSP_STREAM.
dchan_idb_start_index= First index to use when searching for the next IDB of a free D channel.
dchan_idb_index= Index of the currently available IDB of a free D channel.
csm_event= Event just passed to the CSM state machine.
cause Event cause.
ring_no_answer= Number of times call failed because there was no response.
ic_failure= Number of failed incoming calls.
ic_complete= Number of successful incoming calls.
dial_failure= Number of times the connection failed because there was no dial tone.
oc_failure= Number of failed outgoing calls.
oc_complete= Number of successful outgoing calls.
oc_busy= Number of outgoing calls where the connection failed because there was a busy
signal.
oc_no_dial_tone= Number of outgoing calls where the connection failed because there was no dial
tone.
oc_dial_timeout= Number of outgoing calls where the connection failed because the timeout value
was exceeded.
call_duration_started= Indicates the start of this call.
call_duration_ended= Indicates the end of this call.
total_call_duration= Indicates the duration of this call.
The calling party phone number = Calling party number as given to CSM by ISDN.
The called party phone number = Called party number as given to CSM by ISDN.
total_free_rbs_timeslot = Total number of free RBS (CAS) timeslots available for the whole system.
total_busy_rbs_timeslot = Total number of RBS (CAS) timeslots that have been busied out. This includes
both dynamically and statically busied out RBS timeslots.
total_dynamic_busy_rbs_
timeslot =
Total number of RBS (CAS) timeslots that have been dynamically busied out.
total_static_busy_rbs_timeslot = Total number of RBS (CAS) timeslots that have been statically busied out (that
is, they are busied out using the CLI command)
total_free_isdn_channels = Total number of free ISDN channels.
total_busy_isdn_channels = Total number of busy ISDN channels.
total_auto_busy_isdn_channels = Total number of ISDN channels that are automatically busied out.
Table 1 show csm voice Field Descriptions (continued)
Field Description