Filter
Top Products
show csm
Voice over IP for the Cisco AS5800 29
show csm
To display the call switching module (CSM) statistics for a particular or all DSP channels or for a
specific modem or DSP channel, use the show csm privileged EXEC command.
Cisco AS5300 Access Server
show csm {modem [slot/port | modem-group-number] | voice [slot/dspm/dsp/dsp-channel]}
Cisco AS5800 Universal Access Server
show csm voice [shelf/slot/port]
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command shows the information related to CSM, which includes the DSP channel, the start
time of the call, the end time of the call, and the channel on the controller used by the call.
modem Specifies CSM call statistics for modems.
voice Specifies CSM call statistics for DSP channels.
slot/port (Optional) Specifies the location (and thereby the identity) of a specific
modem.
modem-group-number (Optional) Displays configuration for the dial peer identified by the
argument number. Valid entries are any integers that identify a specific
dial peer, from 1 to 32767.
slot/dspm/dsp/dsp-channel (Optional) Identifies the location of a particular DSP channel.
shelf/slot/port (Optional) Identifies the location of the voice interface card.
Release Modification
11.3 NA This command was introduced.
12.0(3)T Port-specific values for the Cisco AS5300 were added.
12.0(7)T Port-specific values for the Cisco AS5800 were added.