Filter
Top Products
Command Reference
60
Cisco IOS Release 12.0(7)T
voice-port
To enter the voice-port configuration mode, use the voice-port global configuration command.
Cisco 2600/3600 Series Router
voice-port slot-number/subunit-number/port
Cisco MC3810
voice-port [slot/port] [summary]
Cisco AS5300 Access Router
voice-port controller number:D
Cisco AS5800 Universal Access Router
voice-port {shelf/slot/port:D} | {shelf/slot/parent:port:D}
Syntax Description
For the Cisco 2600/3600 series:
For the Cisco MC3810:
slot-number Slot number in the Cisco router where the voice interface card is
installed. Valid entries are from 0 to 3, depending on the slot where it has
been installed.
subunit-number Subunit on the voice interface card where the voice port is located. Valid
entries are 0 or 1.
port Voice port number. Valid entries are 0 or 1.
slot/port (Optional) Displays information for only the voice port you specify with
the slot/port designation.
The slot variable specifies the slot number in the Cisco router where the
voice interface card is installed. The only valid entry is 1.
The port variable specifies the voice port number. Valid ranges are as
follows:
Analog voice ports: from 1 to 6.
Digital voice port:
Digital T1: from 1 to 24.
Digital E1: from 1 to 15, and from 17 to 31.
summary (Optional) Display a summary of all voice ports.