Filter
Top Products
voice-port
Voice over IP for the Cisco AS5800 61
For the Cisco AS5300 Access Server:
For the Cisco AS5800 Universal Access Server:
Defaults
No default behavior or values.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the voice-port global configuration command to switch to the voice-port configuration mode
from the global configuration mode. Use the exit command to exit the voice-port configuration mode
and return to the global configuration mode.
Examples
The following example accesses the voice-port configuration mode for port 0, located on subunit 0
on a voice interface card installed in slot 1 for the Cisco 3600 series:
configure terminal
voice-port 1/0/0
controller number Specifies the T1 or E1 controller.
:D Indicates the D channel associated with ISDN PRI.
shelf/slot/port Specifies the T1 or E1 controller on the T1 card. Valid entries for the
shelf variable is 0 to 9999. Valid entries for the slot value is 0 to 11. Valid
entries for the port variable is 0 to 11.
shelf/slot/parent:port Specifies the T1 controller on the T3 card. Valid entries for the shelf
variable is 0 to 9999. Valid entries for the slot variable is 0 to 11. Valid
entries for the port variable is 1 to 28. The value for the parent variable is
always 0.
:D Indicates the D channel associated with ISDN PRI.
Release Modification
11.3(1)T This command was introduced.
11.3(3)T Support for Cisco 2600 series routers was added.
12.0(3)T Support for the Cisco AS5300 Access Server was added.
12.0(7)T Support for the Cisco AS5800 Access Server was added.