Filter
Top Products
Debug Commands
68
Cisco IOS Release 12.0(7)T
Possibe status values are as follows:
• ACTIVE_CALL = 0x0001
• BUSYOUT_REQ = 0x0002
• BAD = 0x0004
• BACK2BACK_TEST = 0x0008
• RESET = 0x0010
• DOWNLOAD_FILE = 0x0020
• DOWNLOAD_FAIL = 0x0040
• SHUTDOWN = 0x0080
• BUSY = 0x0100
• OIR = 0x0200
• HASLOCK = 0x0400 /* vdev_pool has locked port */
• DOWNLOAD_REQ = 0x0800
• RECOVERY_REQ = 0x1000
• NEGOTIATED = 0x2000
• OOS = 0x4000
The following error message shows that a "set_codec" command was issued, but the codec was not
supported by the DSP:
- VTSP_FAIL: codec <value> not supported
Possible codec values are as follows:
• 0 = voipCodecG729,
• 1 = voipCodecG729a,
• 2 = voipCodecG726r16,
• 3 = voipCodecG726r24,
• 4 = voipCodecG726r32,
• 5 = voipCodecG711ulaw,
• 6 = voipCodecG711Alaw,
• 7 = voipCodecG728,
• 8 = voipCodecG723r63,
• 9 = voipCodecG723r53,
• 10 = voipCodecGSM,
• 11 = voipCodecG729b,
• 12 = voipCodecG729ab,
• 13 = voipCodecG723ar63,
• 14 = voipCodecG723ar53,
• 15 = voipCodecG729IETF