Filter
Top Products
68 Digit Code Index
.
g(F)nfa
Start internal call during an external call
and hang up (Open Query)
fg(F)7fa
Put the external caller into the Waiting
Loop if Transfer was unsuccessful
g(F)670r ga
Transfer external caller to external
Telephone (External to External Transfer)
g(F)4ng(F)0g
Calling an internal third Calling partner
and transfer to the second calling Partner.
Settings
Alarm -> page 43 and page 47
7O691#
Activate Alarm input for one Alarm
7O692#
Activate Alarm input for multiple
Alarms
7O690#
Deactivate Alarm input
Mf7Wf
Start programming via an external
Telephone ...
691 #
... and activate Alarm input for one
Alarm
692 #
... and activate Alarm input for
multiple Alarms
690 #
... and deactivate Alarm input
7O442#f*g#
Record Alarm Announcement and
save it (COMpact 4410 USB and
COMmander Basic only)
7O466#f#
Listen to stored Alarm
announcement
Announcement before Answering -> page 48
7O443#f*g#
Record Welcome Message
„Announcement before Answering“
and store it
7O467#f#
Listen to stored Welcome Message
Automatic Dialling (BabyCall) -> page 39
7Q191n#
Switch on Automatic Dialling by entering an internal
telephone number as target.
7Q191#
Switch on Automatic Dialling without entry of
telephone number because number has already
been saved.
7Q190#
Switch off Automatic Dialling (start dialling within 2
seconds).
Automatic Reception -> page 48
7O23S#
Activate/Deactivate Automatic Reception.
Call Allowance and Call Charges -> page 31
7Q93S#
Switch on or off Automatic Least Cost
Routing.
7O74n*e #
Limit the Call Allowance to a certain
number (0000...9998) of units.
7 O 74 n*9999#
Set the Call Allowance to „unlimited“.
7O73n*e #
Increase the Call Allowance by a
certain quantity of units (0000...9998).
7O72n#f
Enqire level of Call Allowance account
of single subscriber.
7Q72#f
Enquire status of Call Allowance
Account.
7Q71#f
Enquire Call Charges accumulated for
the phone.
7O71n#f
Enquire the call charge sums of single
subscribers.
7O70n#
Delete Call Charge sums of single
subscribers.
Call Charge Data -> page 32
7O50S#
Start or stop Call Charge Data printout
7O51n*0#
Instruction to print the Call Charge Data of a
single subscriber’s calls.
7O51n*1#
Instruction of printing the Call Charge Data
of a single subscriber’s business calls.
7O51n*2#
Instruction of printing the Call Charge Data
of a Subscriber’s private calls.
7O52#
Delete all Data out of the Call Charge Data
Memory.
7O860#
Select operation mode “No special functions“
7O861#
Select operation mode „Selection via PC
with ATD command“
7O862#
Select operation mode „Continuous Call
Data output“
7O863#
Select operation mode „Data exchange with
external programs“
7O864#
Select operation mode „D-channel protocol
output in ASCII format“
7O865#
Select operation mode „D-channel protocol
output in binary format“
7O866#
Select operation mode „TAPI Mode“
Call Forwarding (Subscriber), Follow-me -> page 25
7Q121n#
Immediately
a)
switch on Subscriber Call Forwarding
with entry of internal telephone number as
destination.
7Q121#
Immediately
a)
switch on Subscriber Call Forwarding
without telephone number entry because it has
already been saved.
7Q120#
Immediately
a)
switch off Subscriber Call Forwarding.
7Q20#
Switch off all Subscriber Call Forwardings on the
telephone.
7Q25n#
Switch on Follow-me on target telephone.
7Q250#
Switch off Follow-me on target telephone.
Mf7Wf
Start programming from external telephone... .