Auerswald 2206 USB Answering Machine User Manual


 
40 You want to listen into a Room (Room Monitoring)
You can also use the T-Net sequence, you can activate the
„connection without dialling“ with
*53* + number + # and
deactivate with
#53#. If you are using an analog telephone that de/
activates „connection without dialling“ by T-Net function key/menu, you
can use this comfortable functionality (see manual of the telephone;
eventually named „direct call“). Instead of the announcement of the
public exchange, you will get an acknowledgement tone.
If you are asked to enter a target number when using the T-Net func-
tions, you have to enter the Exchange Line Access Number
0 for exter-
nal numbers. On the PBX you are also able to enter Short-Code Dial
Numbers and internal numbers.
These settings are configuration dependent.
If you like to listen into a room, e.g to check if your baby sleeps, you can
use the function „Room Monitoring“ of the PBX. The internal telephone
has to be configured for this function. The room monitoring can be done
with an internal as well as an external telephone.
After the configuration the receiver will be placed near the telephone. A
secret monitoring is not possible.
It is not possible to make a call from this telephone.
It is only possible to enable a single telephone for Room Moni-
toring at the same time.
To deactivate Room Monitoring, replace the receiver of the telephone.
Configure Automatic Dialling / Hot Line
b 7 Q 191 n #
Switch on Automatic Dialling with entry of an internal
subscriber telephone number as destination
your
telephone
public
password
internal number of the target
telephone
or
0r
Switch on Automatic Dialling with entry of an external
number as destination
Exchange Line Access
Number and external number
of the target telephone
or
k
Switch on Automatic Dialling with entry of a Short-
Code Dial Number as destination
Short-Code Dial Number
Switch on/off Automatic Dialling / Hot Line
b 7 Q 191 #
Switching on Automatic Dialling without Entry of a
Number, because Number is already configured
your
telephone
public
password
b 7 Q 190 #
Switching off Automatic Dialling (Start Dialling within 2 Seconds)
your
telephone
public
password
T
N
You want to listen into a Room (Room Monitoring)
Enable the Room Monitoring on an internal Telephone
b7Q68#d
Start Room Monitoring to be able to listen into the room
telephone in the
room to be monitored
public
password
Place the receiver
near the telephone.