Auerswald 2206 USB Answering Machine User Manual


 
26 Somebody should be reachable for internal/external Callers to your Telephone Number (Subscriber Call Forwarding)
case of external telephone numbers. On the PBX you can also enter
internal or Short-Code Dial Numbers as destination telephone numbers.
Here you can also use the T-Net digit order that means you
are able to switch on the „Call Forwarding unconditional“ with
*21* + telephone number + # and switch off with #21# („on busy“
67 instead of 21; „no Reply“ 61 instead of 21).
If you use an analog telephone as an internal subscriber telephone
where the „Call Forwarding“ is to be switched on/off via T-Net function
key/menu, you will also be able to use this comfortable operation (see
manual of the telephone). Then you will hear the acknowledgement
tone instead of the public exchange announcement.
f you are asked to enter the destination number when using the T-Net
function, you will have to enter the Exchange Line Access Number
0 in
case of external numbers. You can also enter destination numbers as
internal or Short-Code Dial Numbers.
These settings are configuration dependent.
The „Forward telephone on Busy“ is configured similarly as described
for the „CF unconditional“ above. The digits
12 only have to be
exchanged for
13 in order to switch on/off a „CF on busy“ instead of an
„CF unconditional“.
The „Forward telephone on no Reply“ is configured similarly as
described for the „CF unconditional“ previously. The digits
12 only
have to be exchanged for
14 in order to switch on/off an „CF on no
Reply“ instead of an „CF unconditional“.
These settings are configuration dependent.
These settings are configuration dependent.
Attention! If you configure Follow-me for a telephone, a previ-
ously configured subscriber Call Forwarding for this telephone
will be switched off. If you switch off Follow-me on a phone, all the sub-
scriber Call Forwarding „unconditional“ settings that have this telephone
as the destination, will be switched off.
The destination telephone needs to have at least the partial exchange
line authorization for forwarded external calls.
You also can switch off the Follow-me from the forwarded telephone
with
7 + password + 120# or with # 21 #.
Thanks to Follow-me you can also forward the calls of several subscrib-
ers to a single telephone next to you.
T
N
Forward Telephone „on Busy“ to an internal/external Telephone because you are currently Telephoning
Forward Telephone „on no Reply“ to an internal/external Telephone in Case of a short Absence
Switch the already configured Subscriber Call Forwarding on/off
b 7 Q 12_ 1 #
Switch on Call Forwarding without entry of a telephone
number because number has already been saved
your
telephone
public
pass-
word
„CF unconditional“
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
or
0
Switch off subscriber Call Forwarding
Switch off all active Subscriber Forwarding Settings for the Telephone
b7Q 20#
Switch off all subscriber Call Forwarding settings for the telephone
corresponding tel-
ephone
public password
N
Receive Calls at another internal Telephone (Follow-me)
b7Q 25n #
Switch on Follow-me on the destination telephone
target
telephone
public password
internal number of the
telephone to be forwarded
b7Q 250 #
Switch off Follow-me on the destination telephone
target
telephone
public password
N