Filter
Top Products
Settings 39
The default is 1 x long for each existing telephone number.
As ISDN telephones most often support their own ringer melo-
dies only and not the melodies of the PBX, you may listen with
analog telephones only.
With the automatic dialling function you can configure your telephone to
dial automatically an internal or external number. This will start 2 sec-
onds after taking the receiver off-hook. It is not necessary to press any
key. If you start to dial before these 2 seconds have elapsed, this has
priority. Please pay attention to the fact that some telephones do not dial
immediately after pressing the key (sometimes delayed by
1
/
2
second).
In this case, you have to start dialling in time!
Configure Ringer Rhythm for internal Calls
b7Q970#
Change to ringer rhythm 1 x long
your telephone public password 1 x long
or
1
Change to ringer rhythm 3 x short
3 x short
Change Ringer Rhythm for external Calls
b7O 98 M * 0 #
Set ringer rhythm „1 x long“
secret password
Number or. MSN/DDI of your exchange line
(without area code)
or
1
Set ringer rhythm
„3 x short“
or
Ü
Set special rhythms No. 1-6
☞
Listen to Ringer Rhythms for internal, external and Alarm Calls
b7Q99 0 #ac
Listen to ringer
rhythm 1 x long
analog
telephone
public
password
1xlong
Telephone is ringing in the selected rhythm
(60 seconds or until receiver is taken off-hook)
or
1
Listen to ringer
rhythm 3 x short
3 x short
or
Ü
Listen to special
rhythm 1...6
special rhythms No. 1-6
(for external calls only)
or
8
Listen to alarm
call
alarm call
☞
Make a Call without any Dialling Operation (Automatic Dialling / Hot Line)