Filter
Top Products
22 You like to take an Emergency Call
On the system telephone COMfortel 1500/2500, COMfort 1000/
1200/2000 plus and smar-tel-i (only on COMmander Basic) the
door bell ringing is shown in the menu. By pressing the key under
„door“, you can open the door menu without interrupting the conversa-
tion (see manual of the telephone).
If the „door ringing“ is switched on for your telephone and the Call-Wait-
ing signal is allowed, a door call will knock during a call and you will be
able to accept the waiting caller (see chapter Call Waiting Tone in the
Receiver on page 10).
In the menu of the system telephone COMfortel 1500/2500,
COMfort 1000/1200/2000 plus and smar-tel-i (only on COM-
mander Basic) „open“ is used to open the door (see manual of the tele-
phone).
The telephone must have a permission configured by the configuration
program COMset to be able to open the door.
For some ISDN telephones the Query (or R) key must be pressed again
after the
7 (maybe also „back“), in order to return to the door call.
If your PBX is extended with a door/switching module the door bell key
inputs can be used as emergency inputs. An alarm may be signalled by
the ringing of an internal telephone as well as of an external telephone.
An alarm may be signalled by the ringing of an internal telephone as
well as of an external telephone. In order to finish the whole alarm
sequence, you are able to confirm the alarm as described here.
If you do not confirm the alarm (also if you dialled a wrong digit), you will
hear the busy tone and the call will be automatically disconnected by the
PBX. There may be another alarm call if the other alarm subscribers do
not confirm the alarm either.
COMpact 4410 USB or COMmander Basic: After picking up the
receiver an announcement text is played back that informs you
about the reason of the alarm (chapter Record the Alarm Announce-
ment by Telephone and listen to it (COMpact 4410 USB and
COMmander Basic only) on page 47).
For the PBX COMpact 2206 USB no alarm announcement is possible.
You hear a signal tone instead.
The Visitor has not pressed the Door Bell Key
b f (**) t g
Call door terminal
internal dial tone (for Direct Exchange Line Telephone only)
telephone number
of the door terminal
door conversation
You are in a Conversation and the Door Bell rings
gY(F)t g
Start internal Query to call door terminal
conversation
(No. 1)
door bell rings
(ignore with
pulse dial)
number of the door
terminal
Query door conversation
(No. 2)
☞
Open the Door during a Door Call
g(F) 7f g
Open the door
door conversation (ignore with pulse dial)
door opener activated, you will hear the
acknowledgement tone for app. 2 sec
back to the door
conversation
☞
Change to another Door during a Door Call
g(F)6g
Finish door terminal call and switch to
the other door terminal
door conversation (ignore with pulse dial) door conversation with the other door terminal, if not busy
You like to take an Emergency Call
Your Telephone rings with the Alarm Rhythm
cbf 0 fa
Confirm alarm
Alarm call to an internal
(special ringing rhythm)
or external telephone
announcement text (COMpact
4410 USB and COMmander Basic)
Signal tone (COMpact 2206 USB)
within 60 seconds with DTMF
telephone, DTMF sender or ISDN
telephone with DTMF signalling
2 seconds
confirming
tone
confirm
alarm
☞