Filter
Top Products
Net Phone Settings
Preferences
Strata CIX Net Phone UG 04/08 25
Docking Tab
The docking tab defines the contents of Net Phone when docked to the top or bottom
of the screen. This includes whether docking is enabled or disabled, uses the slim or
regular profile and a listing of contents by display priority (space limits what can be
displayed).
• Enable Screen Docking – When enabled, the Net Phone will automatically ‘dock’
to the top or bottom of the PC screen when it is moved to the top or bottom.
Docking Settings
• Docked Profile – Once screen-docked the Net Phone will take on either a Slim or a
Regular profile selected here.
• Enable ReDock on Startup – Place a check in the box to cause Net Phone to startup
in the same position and condition as when it was last shut down.
• Used Elements – The displays, buttons, etc. to be used in each profile are
configured by moving available elements to the “Used Elements” list. Whenever
the Net Phone is screen docked, it will place the elements from the “Used
Elements” list on its screen starting from the top of the list, using as many elements
as possible until it runs out of space on the right side of the PC screen. Some types
of elements can only be used once (like an “LCD”) whereas other elements (like
“Programmable Keys”) can be used numerous times.
• Available Elements – The “Available Elements” list shows the types of elements
that are available for use in this profile. Note: Once you’ve changed the screen-
docking settings, the new settings will not be used until the Net Phone is
‘undocked’ (if it’s already screen-docked) and then re-docked.