Samsung SVMi-8 Telephone Accessories User Manual


 
Ports Column The port number (1 through 8) sets a mode change for a particular port. If there are no other entries
in the Schedule Table for this port, it will run the specified mode continuously. If this field is set to All, this entry will
be used by all ports which do not have specific port entries.
Date Column Month and day of month (mm/dd) when the change of mode will occur. If a date is entered in this
field, no option will be given to make an entry in the DOW (Day of Week) field. This entry will take a higher order of
precedence over records based on DOW only on the date specified. Therefore, to guarantee a particular mode setting
over a three day period, a date entry should be created for each day of that period.
Weekday Column Day of Week when a mode change is to occur. Either the Date or Weekday column may be filled
in. If you should manage to make entries in both columns, SVMi-8 will automatically delete one of them.
Start Column The Hour and Minute when a change in mode should occur. The hour must be specified in 24 Hr. for-
mat (i.e., 1:30 P.M. is entered as 13:30).
Subscriber List
To access the subscriber list, from the System Main Menu select SUBSCRIBER LIST and press ENTER.
This area of programming is used to quickly view, or edit the subscriber list. You will see a list of subscribers along
with their extension and their mailbox number.
The number of mailboxes activated on your system will depend on the existence of a valid upgrade key.
To view a subscriber’s data, scroll to the correct subscriber using the arrow keys and press ENTER. Use the right
arrow key to select extension block or mailbox block. When you have made your selection press 'Ctrl + O' (to open)
and the highlighted block will open. You can then edit specific fields. See Extension Block and Mailbox Block for
additional information.
You will also see an EClass and MClass. These are class of service options for the extension and mailbox, and can be
accessible by placing the cursor on them and pressing 'Ctrl + O' (Open).
System Main Menu
6