Filter
Top Products
through the speaker.
Ring Mode
Calls are answered by pressing the SPEAKER button or by lifting the
handset.
Auto Answer Mode
The keyset will automatically answer calls via the speakerphone.
Voice Announce Mode
Keyset users can hear the caller's voice, but caller cannot hear the user.
After the answer, press the SPEAKER button or lift the handset, and the
caller will hear the user's voice.
➥ MMC 10 SET ANSWER MODE
RINGING LINE PREFERENCE
Lifting the handset or pressing the SPEAKER button will answer a call to the
keyset. Using this method, users are assured of answering the oldest call first.
When ringing preference is turned off, the user must press the flashing button to
answer. Users may answer ringing lines in any order by pressing the associated
flashing button.
➥ MMC 12 STATION ON/OFF RING PREFERENCE
SPEAKER PHONE
Keysets have a built-in speakerphone. If the microphone is enabled on the keyset,
calls can be made and received without using the handset. The NX-6B keyset
does not have a microphone, therefore speakerphone operation is not possible.
➥ MMC 22 CUSTOMER ON/OFF MIKE
STATION LOCK
Station locking prohibits another person from using your station. The system
provides two kinds of locking. When LOCKED1 is selected, dialing from your
station is prohibited, but answering calls is permitted. When LOCKED2 is
selected, both dialing and answering calls are prohibited. In UNLOCK condition,
dialing and answering are normal.
➥ MMC 00 STATION LOCK
TRI-COLORED LIGHTS
Keysets make use of tri-colored Light Emitting Diodes (LEDs). Outside calls in
use at a keyset glow green at the using station, and red at all others. Recalls to
these keysets will glow amber (red and green together).
NX-SERIES HYBRID KEY SYSTEM FEATURES SECTION
3 - 21