Filter
Top Products
PORT STATUS CHECK
Users can view their port status on the LCD. Any one of sixteen (16) status items
(IDLE, BUSY, CALLBACK, PROGRAM, etc) may be displayed.
➥ MMC 92 PORT STATUS
POWER FAILURE TRANSFER
In the event of commercial power loss, the first two outside lines can
automatically connect to the last two single-line stations. When power is restored
to the system, the lines and stations will return to normal operation. Calls in
progress at these stations will be disconnected.
PRIME LINE SELECTION
Any station can be programmed to select a specific line, line group, telephone
number, station, or station group.
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
➥ MMC 31 EXT/TRK USE
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore automatic line privacy. This
allows up to four other parties to join your conversation by simply pressing that
line button. This is similar to 1A2 key telephone operation.
➥ MMC 42 TRUNK ON/OFF 1A2 EMULATION
PROGRAMMABLE TIMERS
There are 23 programmable system timers to allow the installation to be
customized to the end user's application.
➥ MMC 50 SYSTEM TIMERS
RECALLS
Calls put on hold, transferred, or camped-on to any station will recall to the
originating station if not answered within the programmed period of time. A recall
that goes unanswered for the same period of time will recall to the system operator
group. Hold and transfer recalls each have individual programmable timers.
➥ MMC 50 SYSTEM TIMERS
REMOTE PROGRAMMING
NX-SYSTEM remote programming allows the technician to access the system
NX-SERIES HYBRID KEY SYSTEM FEATURES SECTION
3 - 11