Filter
Top Products
APPENDIX B DATABASE DOWNLOAD
1. Introduction To Database Download Programming
A database download programming capability has been incorporated into the N X -
S E R I E S via the communication (serial) SMDR port of the optional S M D R / R - M M C
card mounted in the base unit.
This is a software utility designed to allow a certified NX-SERIES technician the ability
to perform a database download on-site.
1.1 Customer Site Requirements
Certain conditions must be satisfied before installing the software package on a
personal computer:
1) Install the optional NX-SMDR/R-MMC card in the base unit.
2) Use a 286 or higher IBM-PC or 100% IBM-compatible computer with the following
MS-DOS version 5.0 or higher
MS-WINDOWS version 3.1 or higher
3 " or 5 " high-density floppy drive
VGA monitor.
3. Rs-232C cable
2. Installing Database Downloading
2.1 Getting Started
1) Create a directory to store the DATABASE DOWNLOAD program.
2) Copy the file to the new directory. The file is compressed and will have a
name similar to N X 7 1 2 2 9 . e x e where 7 1 2 2 9 is the date the file was generated.
3) Type "NX71229" to uncompress the file or Double-click file name on the file
name in the Windows file manager.
4) Double-click on the icon that was created by the install program in the
Windows file manager - "NX_DOWN.EXE".
3. Setup of Database Downloading Program
3.1 Starting NX Download Program
1) Connect the cable required (RS-232C)
2) Turn on the PC.
NX-SERIES HYBRID KEY SYSTEM APPENDIX B DATABASE DOWNLOAD
5 - 5