Filter
Top Products
Automatic Night Service
Automatic Night Service allows the system to automatically go into and out
of Night Service according to system clock time. This feature can be
overridden by the Night Service button.
➥ MMC 56 ASSIGN AUTO NIGHT TIME
OFF PREMISES EXTENSION (OPX)
A single-line (tip and ring) extension may be connected to telephone company
provided off-premises extension (OPX) circuits to remote locations.
OPERATOR GROUP
Stations can be assigned to the operator group for answering incoming calls.
Calls to this group can be set for distributed, sequential, conditional, or
unconditional ringing. Operators can use the In/Out of Group (IOG) feature to
meet varying operator requirements. Group 500 is reserved for the operator
group and is called by dialing "0".
➥ MMC 35 ASSIGN STATION GROUP
OVERFLOW
When calls ringing a station group go unanswered, they can overflow to another
destination after a programmable period of time. Each station group has its own
timer. The overflow destination can be a station, station group, or ring over page.
➥ MMC 50 SYSTEM TIMERS
PAGING
The system allows for the use of one external and four internal zones. Stations
can page any individual zone, all internal zones, the external zone, or all zones.
Using system programming, each keyset may be allowed or denied making
announcements to any particular zone or receiving pages.
➥ MMC 23 PAGE ZONE Internal Page Zone 1, 2, 3, or 4
All Internal Page: 0
All Internal and External Page: ✱
➥ MMC 22 CUSTOMER ON/OFF PAGE USE: ON/OFF
PAGE RECEIVE: ON/OFF
➥ MMC 50 SYSTEM TIMERS PAGE MAX: 1 - 250 SEC
PAUSE DIAL
When dialing an outside call, press [PSE] button to insert a pre-programmed
pause time into the current position in the dialed number.
➥ MMC 71 SYSTEM KEY PROGRAMMING
➥ MMC 72 STATION KEY PROGRAMMING
NX-SERIES HYBRID KEY SYSTEM FEATURES SECTION
3 - 10