Filter
Top Products
TOLL RESTRICTION
There are 250 allow and 250 deny entries of 11 digits each. Each of these
entries can apply to dialing classes B, C, D and E. Class A stations have no
dialing restrictions and class F stations cannot make outside calls.
➥ MMC 30 STATION TOLL CLASS
➥ MMC 60 TOLL DENY TABLE/APPLY
➥ MMC 61 TOLL ALLOW TABLE/APPLY
➥ MMC 65 ASSIGN WILD CHARACTER
TOLL RESTRICTION OVERRIDE
There are several methods of the toll restriction override.
System Speed-Dial Toll Restriction Override
This option allows system Speed-Dial numbers to follow or bypass a
station's toll restriction class.
➥ MMC 66 SYSTEM SPD-DIAL TOLL RESTRICTION
Authorization Code
Authorization codes are used to validate a station user and give
permission to make a call. Each authorization code is associated with a
toll class. When the code is entered, the station toll class is changed to
that of the authorization code.
➥ MMC 63 AUTHORIZATION TABLE
Walking Class of Service
You can change a restricted station's toll class to the same class as your
station by entering the walking COS ID, the station number, and the
station passcode. The default station passcode '1234' cannot be used.
➥ MMC 70 DIAL NUMBERING PLAN COS: 59
Urgent Code
The system provides a maximum of five urgent codes. These codes can
be accessed by any class of service, and are useful to allow access to
emergency numbers.
➥ MMC 64 OVERRIDE TABLE
TONE OR PULSE DIALING
Outside lines can be programmed for either tone or pulse dialing to meet local
telephone company requirements.
➥ MMC 41 TRUNK DIALING TYPE
TRAFFIC REPORT PRINTOUT
The traffic report contains totals for incoming, outgoing, and intercom calls on a
system-wide and a per-station basis. This report can be set to print automatically
NX-SERIES HYBRID KEY SYSTEM FEATURES SECTION
3 - 14