Filter
Top Products
the feature key applies to.
➥ MMC 72 STATION KEY PROGRAMMING
PROTECTION FROM BARGE-IN
Each station can be programmed as either secure or not secure. Secure stations
cannot be barged-in on. A not secure station talking to a secure station cannot
be barged-in on.
➥ MMC 24 ASSIGN BARGE-IN
PULL-OUT DIRECTORY TRAY
A pull-out telephone number directory tray is conveniently located beneath all keysets.
PULSE TO TONE SWITCHOVER
When dialing a number on a pulse dial network, a station user can dial ' # ', and
the system will begin to send DTMF tones.
REDIAL
There are three types of external redial available to all station users:
Automatic Redial
When you dial an outside number and receive a busy signal, use the
automatic redial feature to reserve an outside line and automatically redial
the number for a programmable number of attempts.
➥ MMC 50 SYSTEM TIMERS
➥ MMC 52 SYSTEM WIDE COUNTER
➥ MMC 72 STATION KEY PROGRAMMING
Last Number Redial
The most recent number dialed on a C.O. line is automatically saved and
may be redialed by pressing the REDIAL button or dialing the LNR ID.
➥ MMC 72 STATION KEY PROGRAMMING
Saved Number Redial
A number just dialed on a C.O. line may be saved by pressing the pre-
programmed SNR button or dialing the SNR feature code (17). The number
may be redialed by pressing the SNR button or dialing the SNR ID.
➥ MMC 70 DIAL NUMBERING PLAN SNR: 17
➥ MMC 72 STATION KEY PROGRAMMING
RING MODES
Each user can select one of three ways to receive intercom calls. The phone can
ring normally, automatically answer via speakerphone, or voice announce
NX-SERIES HYBRID KEY SYSTEM FEATURES SECTION
3 - 20