Filter
Top Products
1.3 Telephone Features
66 Operating Manual
To hold the current call and then talk to the new party
• * You may have to enter the Call Hold feature number, "20", after pressing the Recall/
hookswitch on your SLT, depending on the SLT Hold Mode of your PBX. For more details,
refer to "1.1.15 Call Hold" in the Feature Manual.
• An SLT user cannot transfer a new call while holding the current call. To transfer the new
call, first park the original call using the Call Park feature, then go on-hook and off-hook.
• If a call waiting tone is heard but the corresponding CO button does not flash, this tone is
an external call waiting tone from the telephone company. In this case, refer to "
1.3.30 Call
Waiting from the Telephone Company" or "1.3.45 External Feature Access (EFA)".
SLT
While hearing a call waiting tone
Off-hook.
On-hook.
Talk to the
new party.
PT
Press HOLD.
While hearing a call waiting tone
Disregard this step if both
parties are extensions.
Talk to the
new party.
Press CO or
INTERCOM.
OR
(CO)
SLT
While hearing a call waiting tone
Talk to the
new party.
Press Recall/
hookswitch.
C. Tone &
D.Tone
Off-hook.
On-hook.
*