Filter
Top Products
3.2 System Programming (Manager Programming)
164 Operating Manual
[011] System Speed Dialing Name
You can store the name associated with each speed dialing number. These names are displayed when
making calls using the System Speed Dialing feature. To enter characters, refer to "
Entering Characters".
[512] DISA Security Code
You can assign required Direct Inward System Access (DISA) security codes if "Trunk Security" or "All
Security" is selected in [511] DISA Security Mode.
• If the desired number is more than 32 digits, divide the number and store it into more than
one speed dialing number.
•"", "#", FLASH/RECALL, PAUSE, SECRET (INTERCOM), and "– (CONF)" can also be
stored.
• If you do not want to display the stored number when making a call, press the SECRET
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party's number, you should first store an outside (CO) line access
number (9, 81–88).
If you need to enter an account code when making outside (CO) line calls, you can enter
the Account Code feature number and specified account code after the outside (CO) line
access number.
<Example>
Account code
feature number
Account code
1234
Automatic line
access number
9
Phone number
SECRET
[ 123 4567 ]
Enter 011. Dial system
speed dialing
number (00–99).
Press SELECT.
Press NEXT. Press PREV.
To continue
To end
0 1 1
Enter name
(max. 16
characters).
name
system speed
dialing no.
Press NEXT.
NEXT
Press STORE.
STORE
Press END.
END
OR
NEXT PREV
SELECT