Filter
Top Products
1.3 Telephone Features
Operating Manual 119
1.3.76 Power Failure Transfer
If the power supply to the PBX fails, specific single line telephones (SLTs) are automatically connected to
specific outside (CO) lines (Power Failure Connections
). The PBX will switch from the current connections
to Power Failure Connections, and all existing conversations will be disconnected.
Only outside (CO) line calls handled by Power Failure Connections can be made during a power failure. For
more details, refer to "1.1.102 Power Failure Transfer" in the Feature Manual.
1.3.77 Pulse to Tone Conversion
If you are using a pulse-type outside (CO) line, you can temporarily change the dialing mode from pulse to
tone to access computer telephone services that require tone dialing such as Voice Mail.
Feature Manual References
• 1.1.100 Personal Speed Dialing
Operating Manual References
• 3.1.3 Flexible Button Assignment
Create or edit a One-touch Dialing button, store the desired phone number, or feature
number.
Feature Manual References
• 1.1.102 Power Failure Transfer
• You cannot change from tone to pulse dialing mode.
Programming Manual References
[PT Programming]
• [119] Redialing after Pulse to Tone Conversion
• [401] Dial Mode
[PC Programming]
• 9.1.11 Detail [1-10]—CO—Redialing after Pulse to Tone Conversion
• 9.3.3 Detail [3-3]—Dial Mode
Feature Manual References
• 1.1.104 Pulse to Tone Conversion
PT/SLT
Enter #. Dial desired number
(Tone mode).
Dial
phone number
(Pulse mode).
phone no.
desired no.