Filter
Top Products
1.3 Telephone Features
130 Operating Manual
Inband (DTMF) Integration (e.g., KX-TVS series VPS/KX-TVA series VPS) or APT Integration (e.g., KX-
TVS50 series VPS/KX-TVA50 series VPS). If your telephone has a MESSAGE button or Message/Ringer
Lamp, the corresponding button or lamp turns on and lets you know you have messages. A single line
telephone (SLT) user will hear dial tone 3 when going off-hook if there are any messages in his or her
mailbox.
To set/cancel
• If your PBX has a Panasonic VPS connected using Inband (DTMF) integration, your PBX
automatically sends a special signal to the Voice Mail port before connecting the caller. To
enable this feature, it may be necessary to set the signal format required by your VPS
before setting the Call Forwarding (FWD) destination to Voice Mail as follows:
– Setting A: only sends the extension number to the Voice Mail port. To set or cancel,
enter "91#" or "90#" respectively after pressing the FWD/DND button or entering "71".
– Setting B (default): sends "#6" followed by the extension number. "#6" is used by a
Panasonic KX-TVS series VPS/KX-TVA series VPS to force the VPS port into voice
mail service. To set or cancel, enter "92#" or "90#" respectively after pressing the
FWD/DND button or entering "71".
For more details, refer to "1.1.121 Voice Mail Inband (DTMF) Integration" in the
Feature Manual.
PT/SLT
Off-hook.
Press FWD/DND
or enter 71.
OR
17
voice mail
extension no.
Dial voice mail
extension number.
Enter required number.
1
0
2
Busy/No Answer
All Calls
Cancel
For "Cancel", go on-hook
directly after entering "0#".
On-hook.
C.Tone
Enter #.
An SLT user can enter "0"
instead of "#".