Filter
Top Products
65
While on an active call
Charge a Call or Charge a Forced Call
Charge a Call or Charge a Forced Call allows you to enter a billing number for
charge-back purposes. The account code can be from 2 to 14 digits. You may
be prompted to enter an account code, or you may voluntarily enter an account
code when an incoming call is answered. Check with your system
administrator or supervisor for account codes and the feature access code
(FAC).
To enter an account code
when prompted by the
Meridian SL-100 system:
1. Dial the telephone number you
are calling.
2. When prompted by the telephone
system with a tone, dial the account
code digits.
To enter an account code voluntarily
when an incoming call is answered:
1. Answer the incoming call and ask the
calling party to hold.
2. Flash the hookswitch.
3. Dial the FAC.
4. When you receive dial tone, dial the
account code digits.
5. Flash the hookswitch again to return to
the call.
Inspect Key
The Inspect Key allows you to be on an active call and display a second
caller’s name without interfering with the current call in progress.
Note: If Auto Display is enabled, the Calling Line Identification for the second
call automatically displays.