Filter
Top Products
99
.
Configuring Bluetooth wireless
headsets
Follow these procedures to configure the IP Phone radio system to support
Bluetooth (BT) wireless technology enabled headsets.
The Bluetooth Setup menu option is not available on all phones. If the
Bluetooth Setup menu option is dimmed, or fails to open, the feature is not
enabled on your phone. Before you can use a wireless headset with your
phone, the system administrator must enable the feature. Contact your
administrator to find out if Bluetooth wireless technology functionality is
available for your use.
If Bluetooth wireless technology is enabled on your phone, and
password-protection for the Local Tools menu is enabled, you can still
double-press the In Calls key to access the Bluetooth Setup menu.
Navigation
• “Pairing a wireless headset with the IP Phone” (page 99)
•
“Unpairing a wireless headset” (page 101)
•
“Interaction with wired headsets” (page 102)
• “Switching between a wireless and a wired headset” (page 102)
•
“Bluetooth headset feature activation” (page 103)
• “Call answer” (page 103)
Pairing a wireless headset with the IP Phone
Follow this procedure to pair a wireless headset with your IP Phone. See
Figure 1 "IP Phone 1150E components" (page 10) for the location of the
send key.
ATTENTION
Nortel recommends that you not pair more than one headset of the same model,
because they appear with identical names in the Paired list.
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.