Filter
Top Products
95
.
Using the Outbox
The IP Phone 1150E has a dedicated fixed key for the Outbox. Information
about outgoing calls is stored in the Outbox. The system logs the outgoing
key number, time, and date. If the duration of the call is longer than two
seconds, the system captures the display as it appeared when the call
was made.
The Outbox can store a maximum of 10 calls. When the maximum is
reached, the oldest call is dropped. Calls appear in the list in the order in
which they were made, with the most recent call at the top of the list.
The Outbox call display consists of a time or date stamp and a name or
number. A time stamp appears beside calls you make on the same day on
which you view the Outbox. A date stamp appears beside calls that were
made prior to the day of viewing. If no name or number was extracted
from the display of the outgoing call, the number dialed appears. Use the
navigation keys to scroll through the list. The list does not wrap around.
See Figure 1 "IP Phone 1150E components" (page 10) for the location of
the Outbox key.
Follow these procedures to use the Outbox feature.
Navigation
• “Accessing the Outbox” (page 95)
• “Viewing Outbox call information” (page 96)
• “Storing a number from the Outbox” (page 96)
• “Using the Outbox to make a call” (page 97)
• “Resetting the Outbox” (page 97)
Accessing the Outbox
Follow this procedure to access and use the Outbox.
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.