Filter
Top Products
66 Using the Feature menu
2 On the terminal, select the key that you want to assign to a
different feature.
3 From the Feature menu, select and open Assign.
4 Press Ok, or press the send key.
The Assign menu opens.
--End--
Defining the key type
Follow this procedure to define the key type.
Each feature key can be defined in one of two ways: Central or Local.
A feature key defined as Central can have a Centrex feature, such as
Call Forward, assigned to it. A feature key defined as Local can have a
directory entry assigned to it. By default, all feature keys are defined as
Central.
For further information about Centrex features, see Nortel CICM
Fundamentals, (NN10044-111).
Step Action
1 From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2 Select a key to change.
The Feature submenu appears.
3 Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
the Key Type soft key labels appear.
If the selected key is assigned to a local feature, these soft key
labels appear: Key Type and Feature.
4 Press Key Type.
The Key Type screen appears. A check mark appears beside
the type currently assigned to the key.
5 Perform one of these actions:
• To change Central to Local, select Local.
• To change Local to Central, select Central.
6 Press Ok, or press the send key.
The key type is changed and a check mark appears beside the
selection.
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.