Filter
Top Products
Unpairing a wireless headset 101
step 5. If the search is not successful, turn off the headset
and repeat step 3.
5 Select Pair
6 Press the send key.
A dialog box appears, prompting you to enter a PIN.
7 Enter the headset PIN (typically "0000") and press OK.
8 To verify that the pairing was successful, scroll through the list to
see if the headset appears in the Paired box. If the headset is
not successfully paired with the IP Phone, turn it off and repeat
step 3.
--End--
Unpairing a wireless headset
Follow this procedure to unpair a wireless headset.
When you complete this procedure, the Bluetooth wireless technology
headset is no longer paired with the IP Phone. To use the wireless
headset again, perform the pairing and activation procedure, see “Pairing a
wireless headset with the IP Phone” (page 99).
Step Action
1 Double press the In Calls key or, alternatively, complete the
following steps:
a Double-press the Services
key.
The Services menu is displayed.
b Select
Preferences.
The Preferences menu is displayed.
c Select Bluetooth
Setup.
The Bluetooth Setup dialog box appears.
2 Select Unpair from the menu.
3 Press the send key.
4 Wait for 8 to 10 seconds.
The Bluetooth wireless technology headset is no longer paired
with the IP Phone. To use the wireless headset again, you must
perform the pairing and activation procedure, see “Pairing a
wireless headset with the IP Phone” (page 99).
--End--
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.