Filter
Top Products
21
.
Connecting the IP Phone to the LAN
Follow this procedure to connect the terminal to the Local Area Network
(LAN), and to a power source.
CAUTION
Risk of equipment damage
Do not plug the IP Phone into a regular telephone jack. This
causes severe damage to the terminal. Consult your system
administrator to ensure that you plug your telephone into a
10/100BaseT Ethernet jack.
Prerequisites
•
IP Phones can be powered by an AC adapter or over a LAN. Contact
your installation technician to identify the correct power option.
• See Figure 4 "IP Phone 1150E connectors" (page 22) for the location
of the connectors on the back of the IP Phone.
Step Action
1 Connect one end of the CAT-5 line cable to the LAN Ethernet
port, identified with a LAN icon, located on the underside of the
terminal.
2 Connect the other end of the CAT-5 line cable to the IP network
jack.
For a terminal sharing LAN access with a PC, connect a second
CAT-5 line cable to the PC Ethernet port located on the back of
the terminal, identified by the PC icon. Connect the other end of
the cable to the Ethernet port on the computer.
3 For a secure power connection, thread the cord around the strain
relief retaining hook and through the channel on the underside
of the terminal.
4 Secure the terminal footstand to the terminal base.
--End--
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.