Filter
Top Products
Bluetooth headset feature activation 103
If you uncheck the first option and press the Exit key the wired
headset/handset will work after several seconds. If you uncheck
the second option you can immediately switch to the wired
headset/handset.
A check mark indicates that the wireless headset is active. Clear
the check mark to use a wired headset/handset. This option is
on (o) by default.
3 Press the Exit
key to toggle this option on or off.
--End--
Bluetooth headset feature activation
Feature activation using a Bluetooth wireless technology headset paired
with an IP Phone may be different from the headset manufacturers
instructions. When paired with an IP Phone the following limitations apply:
• Feature activation on an IP Phone paired with a BT headset depends
on server implementation.
•
Call Transfer from headset to handset does not work in a handsfree
profile.
•
The administrator must provision Auto Answer on Ring against the user
to use the Call answer functionality.
Call answer
Follow this procedure to answer an incoming call using a headset.
Step Action
1 When there is an incoming call, press the In Calls key.
The incoming call is connected to the headset.
2 Press the Goodbye
key to terminate the call.
--End--
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.