Filter
Top Products
100 Configuring Bluetooth wireless headsets
Prerequisites
Bluetooth wireless technology must be available for use on your phone.
Check with your administrator.
To perform this procedure, you need information provided with the headset
documentation.
• You must put the Bluetooth technology headset in pairing or search
mode. For a Sony Ericsson HBH-662 Bluetooth earphone, the steps
are included in this procedure. For other headsets, refer to the headset
documentation or contact the vendor for this procedure.
• In the following procedure, step 7 requires you to enter the headset
PIN (sometimes called a passkey). You can find this information in the
headset documentation. Typically this value is 0000.
Step Action
1 Double press the In Calls key or, alternatively, complete the
following steps:
a Double-press the Services
key.
The Services menu is displayed.
b Select
Preferences.
The Preferences menu is displayed.
c Select Bluetooth
Setup.
The Bluetooth Setup dialog box appears.
2 Ensure the Enable
Bluetooth and Use Bluetooth Headset check
boxes are enabled.
3 Put your Bluetooth technology headset in its pairing or search
mode. If your headset is a Sony Ericsson HBH-662 Bluetooth
earphone, perform these steps (for other types, refer the
documentation provided with the headset):
a Turn the headset on by pressing the power key in the front
panel of the headset.
b Press and hold the plus (+) and minus (-) keys at the same
time until a searching mode picture/flash shows on the
earphone display.
4 Perform these steps to search for the paired headset:
a Select Search
in the Bluetooth Setup screen.
b Press the send key.
A searching message is displayed.
If the search is successful, the name of the headset
appears in the Found combo box and you can proceed to
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.