Filter
Top Products
50 While on a non-ACD call
Step Action
1 During a call, press the key to which the transfer feature is
assigned.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
2 Enter the number to which to transfer the call.
3 When that number rings or is answered, press the transfer key
again.
The call is transferred.
--End--
Using conference call
Follow this procedure to engage in a conference call.
The Three Way Call (3WC) feature allows you to add three calls to a
conference. If six-port conference is available, you can add a maximum of
six calls to a conference. If six port conference is available, Conference
appears beside a feature key in the display.
Step Action
1 During a call, press the key to which the conference call feature
is assigned, either 3WC or Conference.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
2 Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding,
to announce the conference.
3 Press the conference key again to merge the calls.
4 Repeat steps 2 and 3, to add more calls to the conference.
5 If you make a mistake dialing, or a party does not want to be
included in the conference, press the extension key of the
conference call to reconnect to the conference.
--End--
Using the mute feature
Muting prevents the transmission of sounds through the microphone.
Follow this procedure to use the mute feature.
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
Copyright © 2009 Nortel Networks
.