Filter
Top Products
66 Tone Commander 7210/7220 User Manual
Select VOLUME.
The display will show the current preset volume settings for
the selected voice mode.
Select RCV- or RCV+ to adjust the default receive volume
level.
The new setting will be shown in the display. The factory
default setting is 03.
Select XMT- or XMT+ to adjust the transmit volume level
(headset only).
The new setting will be shown in the display. The factory
default setting of 06 is sufficient in most cases; only change
this setting if required by line conditions or your headset
characteristics.
Confirm that the level is properly set by placing a call to
another party. If they report that your voice level is too low,
increase the transmit level one step at a time. If the remote
party hears an echo of their voice, reduce the level.
Press the Done key to return to the voice mode menu or the
Setup key to exit Setup Mode.
Speakerphone Transmit Level
The speakerphone transmit level may be increased or decreased. The
factory default setting of 04 is sufficient in most cases; only change this
setting if required by line conditions.
Using the speakerphone, place a call to another party. If they report
that your voice level is too low, increase the transmit level one step at a
time. If the remote party hears an echo of their voice, reduce the level.
After you have placed a call, select VOICE from the User
Options menu (Setup → USER
→ More
4
→ VOICE).
Select SPKR.
The display will show the current transmit level setting.
Done
VOLUME:RCV=04 XMT=05
RCV+ RCV- XMT+ XMT-
SPEAKERPHONE:XMT=04
XMT+ XMT-