Filter
Top Products
30 Tone Commander 7210/7220 User Manual
simultaneously requesting updates. You may manually enter
the minutes digits, but it is recommended that you use the
default calculated value.
If you need to make corrections, select
!
BKSP (backspace)
to delete the previous character.
When all changes have been made, press the Done key to
return to the IP Configuration Update menu or the Setup key
to exit Setup Mode.
Manual Update
To perform a manual update, the phone must have the TFTP server’s
IP address entered manually or downloaded via DHCP.
From the Installation Options menu, select UPDATE.
(Setup → INSTL → UPDATE)
Select TFTP.
Select START to initiate the manual update.
"Restarting" indicates that new operating software is being
loaded into the phone. When complete, the phone will restart.
Done
IP CONFIGURATION UPDATE
DHCP TFTP FLASH TELNET
TFTP CONFIG UPDATE
START AUTO
READING CONFIGURATION
FROM TFTP SERVER...
RESTARTING FOR NEW
SOFTWARE DOWNLOAD...