Filter
Top Products
40 Tone Commander 7210/7220 User Manual
Voice Announce configuration is not affected by Parameter Download,
except when CA/DN key allocations change. The default Voice
Announce setting for new CA/DN keys identified in a download is
disabled.
Selecting Incoming Directory Numbers
CA/DN keys must be configured for Voice Announce before selecting
incoming DNs.
Select DNs to restrict Voice Announce calls to specific callers
(or groups of callers). The Calling DN templates are matched
to the incoming caller ID to identify Voice Announce calls. You
can enter up to three Calling DN templates.
Select ALL if you want to accept all incoming calls.
To restrict Voice Announce calls to specific callers or groups,
use CLEAR or
!
BKSP to delete the current entry, then enter
a combination of wild cards (
*
matches any group of
characters, # matches a single character) and numeric digits
with the dial pad to allow individual callers or blocks of callers.
For example, 4253491
*
matches 425-349-1000 through
425-349-1999; 42534910#0 matches 425-349-1010,
425-349-1020, etc. Non-numeric characters (such as
hyphens) in the incoming caller ID are ignored. Up to 10 digits
(including wild cards) may be programmed in each template.
Enter all digit positions as shown in the display for an
incoming call; in most cases, this will include the area
code.
Press the More
4
key to enter additional Calling DN
templates.
When all Calling DN templates have been entered, press the
Done key.
CALLING DN#1=4253491*
|BKSP CLEAR ALL
Done
More