Filter
Top Products
Tone Commander 7210/7220 User Manual 25
A password may be set to prevent unauthorized
entry into the Installation Options menu.
When prompted for a password, enter your 4-digit
password with the dial pad. Press the Done key
after entering the password.
To change or remove the password, please refer to
page 43.
IP Addresses
____________________________
IP address entries are required for the phone, subnet mask,
gateway/router, iMerge, and optional TFTP and SNTP servers. The
default setting uses DHCP to automatically set the phone address,
subnet mask, TFTP server address, SNTP server address, time offset,
and gateway/router address. The phone can obtain the iMerge
address, as well as software updates, and QoS settings from a TFTP
server. Please refer to the 7210/7220 Network Administration Guide.
Note: you must restart the phone after any IP address changes have
been made for the changes to take effect
(Setup → ADMIN → More
4
→ RESTART).
Disabling IP Configuration via DHCP (not recommended)
From the Installation Options menu, select UPDATE.
(Setup → INSTL → UPDATE)
Select DHCP.
IP CONFIGURATION UPDATE
DHCP TFTP FLASH TELNET
DHCP=ENABLED
ENABLE DISABLE