Filter
Top Products
Tone Commander 7210/7220 User Manual 23
Voice Mode
Handset/Headset Mode – selects handset or headset operation
(page 65).
Preset Volume Levels – sets handset and headset volume levels,
and speakerphone transmit level (page 65).
Display Contrast – adjusts the contrast of the display for best visibility
(page 67).
Call Log Password – sets or removes a password to control entry into
the call log (page 68).
Voice Announce – enables or disables automatic call answering by
the speakerphone (page 39).
Label the Set
____________________________
Label the multifunction keys with the telephone number, feature name,
speed dial party name, or other appropriate designation. A perforated
label sheet is provided with the telephone.
An ISDN Telephone Setup Wizard for Windows 95/98/NT/XP can be
downloaded from Tone Commander’s web site. This program prints
key labels and service ordering forms. A Microsoft Word template for
key labels only is also available. Please refer to Appendix A on page
72.
If you want to manually create labels, use paper strips 5” wide x ¼”
high. Label text is on 1” centers, with 0.9” text space for each key.
To install the labels, remove the plastic overlay surrounding the
multifunction keys. Peel off the protective strips from the adhesive in
the grooves beneath the keys. Insert the label strips in the grooves,
then replace the overlay.