Filter
Top Products
36 Tone Commander 7210/7220 User Manual
If the phone is on-hook when a Feature Activator key with
CALL enabled is pressed, a new call will be originated. If the
phone is already off-hook when the feature key is pressed, the
feature will be activated within the context of the current call.
Press the Done key twice to return to the key selection menu
or the Setup key to exit Setup Mode.
DSS Keys
DSS keys are a special type of Call Appearance/Directory Number
keys that are programmed with speed dial numbers to provide Direct
Station Selection. When the call appearance is idle or busy, DSS keys
act like Speed Dial keys, to call a station. When ringing, DSS keys act
like CA/DN keys, to answer a call. The LED indicator on the key shows
the status of the station’s call appearance (idle, ringing, hold, busy).
Shared call appearances for stations you wish to monitor must be
configured on your ISDN line. You must program the DSS number to
dial the monitored station on your phone (even if Parameter Download
is provided).
If the Call Appearance/Directory Number is not shown in the
top line of the display, you can enter a reference directory
number for the monitored station with the dial pad. This
number is not required for operation.
If you need to make corrections while entering numbers,
select
!
BKSP (backspace) to delete the previous digit.
Select DSS#.
Using the dial pad, enter the number you would dial to call the
monitored station.
If you need to make corrections while entering numbers,
select
!
BKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over.
1001
|BKSP CLEAR PAUSE
Done
08=DSS/DN# 425-349-1001
|BKSP DSS#