Filter
Top Products
Tone Commander 7210/7220 User Manual 59
To add or change DSS keys, use the KEYS option in the Installation
Options menu (see page 36).
Speed Dial Programming
From the User Options menu, select SPDIAL.
(Setup → USER
→ SPDIAL)
The current state of each multifunction key is shown by its
status indicator.
Green – unused key, available for speed dial use.
Red – Speed Dial key that has already been
programmed.
Off – key set up for a call appearance, feature
activator, or DSS.
Press a lit key to program it for speed dialing.
The selected key’s indicator will alternately flash red and
green.
The currently programmed dial string, if any, will be shown in
the display.
Enter digits (24 maximum) with the dial pad.
When all digits have been entered, press the Done key to
return to key selection or the Setup key to exit Setup Mode.
If you need to make corrections while entering numbers,
select
!
BKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over. A Speed
Dial key will revert to 'Unused' if saved with a cleared dial
string.
Pauses
The first pause in a dial string will wait until the call is answered;
additional pauses delay dialing for one second. Enter multiple pauses
to increase the delay time. Pauses are entered with the PAUSE
softkey, and are shown in the display as a P character.
DIAL#=5553491000
|BKSP CLEAR PAUSE
Done