Filter
Top Products
20 Tone Commander 7210/7220 User Manual
Alias
If the alias is rejected by iMerge or there is no stored alias, the
following will be shown:
Enter the correct alias as supplied by your service provider,
then press the Done key.
H.235 Password
If H.235 password is rejected by iMerge or there is no stored password,
the following will automatically be shown:
Enter the correct password as supplied by your service
provider, then press the Done key. If passwords are not used,
press the Done key with no entry.
To change the existing H.235 password and iMerge alias after
the phone is registered, select CHANGE from the Alias entry
menu (Setup → INSTL → ALIAS → CHANGE).
When the phone's initialization is complete, a time and date
display will be shown.
SPID Entry
The SPID number may be assigned automatically if the network
supports National ISDN AutoSPID, or a generic format SPID is used.
If AutoSPID is not supported, the phone will attempt to “guess” the
correct SPID based on the alias. If the network does not accept this
“guessed” SPID, you will be prompted to enter the phone’s primary
telephone number, which is used by the phone to generate a SPID
JAN 10, 2002 12:42 PM
ALIAS=
|BKSP CLEAR
H235 PW=
|BKSP CLEAR
Done
Done