Filter
Top Products
Tone Commander 7210/7220 User Manual 29
IP Configuration and Software Updates
______
Telephone operating software and configuration parameters can be
automatically updated daily from the TFTP server at a preset time,
manually updated from the phone using files on the TFTP server, or
updated from a client PC.
Automatic Update
A properly configured network TFTP server is required for automatic
updates. Please refer to the 7210/7220 Network Administration Guide.
From the Installation Options menu, select UPDATE.
(Setup → INSTL → UPDATE)
Select TFTP.
Select AUTO.
If TFTP updates are currently disabled, select ENABLE.
Enter new digits for the update time with the dial pad. The
cursor will advance automatically as each digit is entered.
Time must be entered in 12-hour format. AM/PM is changed
with a softkey.
The minutes value is calculated based on the MAC address of
the phone, to minimize the possibility of multiple phones
TFTP UPDATE TIME=03:26AM
DISABLE |BKSP AM/PM
IP CONFIGURATION UPDATE
DHCP TFTP FLASH TELNET
TFTP CONFIG UPDATE
START AUTO
TFTP UPDATE=DISABLED
ENABLE