Filter
Top Products
Tone Commander 7210/7220 User Manual 31
If a new version program is not found, the following screen will
be shown. Press any key to return to the previous menu.
If phone configuration files are missing from the TFTP server,
or the correct TFTP server address has not been entered or
set via DHCP, the following screen will be shown.
Select EDIT.
Enter the correct TFTP server address. You can verify the
address by selecting PING. When finished, press the Done
key.
If you need to make corrections, select
!
BKSP (backspace)
to delete the previous digit.
CLEAR removes all digits, allowing you to start over.
Update from a Client PC
Telephone software can also be updated from a network client PC
running Tone Commander's Flash Update program.
To enable flash updates:
From the Installation Options menu, select IP.
(Setup → INSTL → UPDATE)
TFTP VERS SAME AS PHONE
PRESS ANY KEY
NO TFTP SERVER RESPONSE
EDIT
IP CONFIGURATION UPDATE
DHCP TFTP FLASH TELNET
TFTP=216.122.043.234
|BKSP CLEAR PING