Filter
Top Products
Tone Commander 7210/7220 User Manual 41
Selecting Alerting Patterns
Use the Alert option to allow only specific types of incoming calls (e.g.
internal, external, intercom, etc.).
CA/DN keys must be configured for Voice Announce before selecting
alerting patterns.
Select ALERT to define a specific alerting pattern required to
validate incoming Voice Announce calls.
ANY – Accept any type of alerting (default value)
NORMAL – normal alerting (pattern 0); typically used for
internal calls.
DIST – distinctive alerting-intergroup (pattern 1); typically
used for external calls
INTCOM – EKTS intercom (pattern 3); used for intercom
calls
PRI – distinctive alerting-special/priority (pattern 2);
used for designated priority calls
Press the Done key after selecting the alerting pattern.
Automatic Muting
Select MUTE.
Done
AUTOMATIC MUTE=ON
ON OFF
ALERTING=ANY \
ANY NORMAL DIST INTCOM
ALERTING=ANY \
PRI