Filter
Top Products
58 Tone Commander 7210/7220 User Manual
Setting the Time and Date
_________________
From the User Options menu, select CLOCK.
(Setup → USER
→ CLOCK)
The current time and date will be displayed, with the cursor
flashing on the first digit.
Enter new digits for the date and time with the dial pad. The
cursor will advance automatically as each digit is entered.
Time must be entered in 12-hour format. AM/PM is changed
with a softkey.
If you need to make corrections, select
!
BKSP (backspace)
to move the cursor to the left.
The More
4
key moves the cursor to the right.
When all changes have been made, press the Done key to
return to the User Options menu or the Setup key to exit
Setup Mode.
If a network time server is available, the clock will be set
during telephone initialization or restoration of power and
updated once an hour.
Setting Up Speed Dial Keys
________________
Speed Dial keys facilitate dialing for voice mail, auto attendant and
similar applications. Pressing a Speed Dial key with no active call will
originate a call on an idle call appearance and dial the selected
number. If a Speed Dial key is pressed while connected on an active
call, the speed dial number is dialed on that call. Speed dialing can be
used in conjunction with manual dialing. Any unused multifunction key
can be designated as a Speed Dial key. Speed Dial keys can also
include network feature activator codes – this feature is explained on
page 37.
Speed Dial keys can be programmed with up to 24 digits including 0-9,
#, * and "Pause". The keys must be programmed at the terminal; they
are not set by a Parameter Download.
Done
04-27-01 11:16AM
|BKSP AM/PM