Filter
Top Products
54 Tone Commander 7210/7220 User Manual
After all keys have been tested, press any key to exit the test.
You can also exit the test at any time by pressing the Done
key to return to the Test menu or the Setup key to exit Setup
Mode.
Diagnostic Display
_______________________
From the Administration Options menu, select.
(Setup → ADMIN
→ DIAG)
Select LINK to view the status of the connection to iMerge.
The display will show the Ethernet physical layer data rate, IP
layer status, ISDN Layer 3 state, and the ISDN network switch
type.
Select PACKET to view packet reception statistics for an
active call or the last call by call appearance. Refer to the
7210/7220 Network Administration Guide for a detailed
description of packet statistics.
Press the More
4
key to view additional packet types.
123456789012345678901234
567890
Done
DIAGNOSTIC OPTIONS
LINK PACKET PING
PHY:100MBPS IP:LINKED
L3:OK SWITCH=5E CUSTOM
CONCEALED=27 <1%\
CA1 |BACK