Filter
Top Products
ND-70895 (E) CHAPTER 5
Page 81
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.7.2 Multiple IPs
3.7.2.1 Functional Outline
In this configuration (Multiple IPs), IP can be accommodated to multiple nodes in a Fusion Network.
Since Series 7400 (Release 8) software, establishing the CCIS line is not necessary to use OAI system
through the network. (“Facility” which can be used through the Fusion Network varies in “the OAI
application”.)
This feature is available with Series 7400 (Release 8) software.
3.7.2.2 Using Conditions
(a) Telephone Number (max. 5 digits) is used for the station number type to activated OAI system
through Fusion network.
(b) Logical Route is used for the route type to activate OAI system through Fusion network.
(c) Only one IP to be used for “OAI Terminal Anywhere” can be contained in a Fusion Network
(Multiple IPs).
(d) IP can be accommodated to multiple nodes in a Fusion Network. However, maximum number
of Status Monitoring Requests to a terminal is decided by the system data (max. 8 ports
available including UAP). Note that the normal operation is not guaranteed if Status
Monitoring is requested to a terminal from more than the number of ports.
UAP
IP
FACILITY
Node B
OAI Terminals
FACILITY
Node A
UAP
IP
FACILITY
FCCS
FCCS
FCCS
OAI Terminals
OAI Terminals
Node C