Filter
Top Products
ND-70895 (E) CHAPTER 5
Page 61
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Basic Office Data for OAI System
2.2 Data for OAI Terminal
In the case of D
term
1. ASDT (In the case of Business; Station Data), AASP (In the case of Hotel system; Station Data)
Note 1
Assign station data
Voice Port: TEC12 Data Port: TEC13
(Normal setting for others)
Note 1:
For ASDT/AASP command, refer to the Command Manual of the NEAX2400 IMX.
2. AKYD (D
term
Key Data)
Assign the function key data of D
term
Assign FKY34–47 to any positions of FKY 1–16.
(Normal setting for others)
3. AOKC (OAI Key Code Data)
Assign the OAI key code data
OAI key code 1 ~ 14 respectively corresponds to FKY34 ~ 47 of AKYD
4. AOAC (OAI Access Code Data)
If necessary, assign OAI access code data when using “OAI key + Access code” system to activate
the application by MSF/TMF
In the case of Single-Line Telephone
1. ASYD (System Data)
Assign OAI Host Computer Respond Wait Timer
2. ANPD (Numbering Plan Data)
Assign the minimum necessary number of digits for OAI Dial Number Continuous Transfer Code
Note 2
3. ASPA (Special Access Code Data)
Assign the OAI Dial Number Continuous Transfer Access Code
SSCA: 69 (OAI Dial Number Continuous Transfer)
NND : Necessary Number of Digits of OAI access code (Max. 3 digits)
Note 2:
For ANPD command, refer to the Command Manual of the NEAX2400 IMX.
4. AOAC (OAI Access Code Data)
Assign OAI access code data