Filter
Top Products
CHAPTER 4 ND-70895 (E)
Page 28
Revision 1.0
COMMANDS
Commands
3.2 Outline of Commands for OAI System
The interrelation among the commands to be used in the OAI System is illustrated in Figure 4-2.
Figure 4-2 Interrelation among OAI System Commands
AKYD: This command is used to assign the function key codes (For OAI: 34 ~ 47) to the function key
positions of the D
term
.
AOKC : This command is used to assign the meaning of OAI key code assigned by AKYD command.
Note 1:
Function key codes 34 ~ 47 respectively correspond to OAI key codes (1 ~ 14).
AOAC : This command is used to assign the access code/operation code for the designated facility.
This command is used only when the Facility Kind (F-KIND) has been set to “3” (Open Appli-
cation Interface) by AOKC command.
Note 2:
Parameters OAI Key Code (KEY-CODE), Facility Kind (F-KIND), and Operation Code (OP-CODE) are
determined by the application software to be used at each office.
3.3 Items to Be Explained by Each Command
Each command is described by the following items.
Command : The name implies the command and its functions.
(1) Functions : This item outlines the command functions.
(2) Precaution : This item explains precaution for use of the command.
(3) Parameters : This item explains the meaning of the information (parameters) of the data of
the command.
(4) Related Commands : This item specifies other command or commands pertaining to the same data,
assignment/deletion/change/display/list up of the details of that specific data.
NEAX2400 IMX
DLC/ELC
AKYD
AOKC
AOAC
ASDT
AKYD
External Computer
ASYD
ARNP
IP
Command Name : Commands for NEAX2400
ASYD
ARNP
ASDT
AKYD
: Assignment of System Data
: Assignment of Reverse Numbering Plan Data
: Assignment of Station Data
: Assignment of Dterm
Key Data