Filter
Top Products
CHAPTER 4 ND-70895 (E)
Page 34
Revision 1.0
COMMANDS
AMNO
AMNO: Assignment of Monitored Number
12. Functions
This command is used to assign/delete Monitored Numbers.
13. Precaution
Monitored Number (MON) is a number of maximum 5 digits consisting of 0 ~ 9, “*” and “#”.
Note that, in the case of a hotel system, UCD Pilot Number (STN) is a number of maximum 6 digits,
respectively.
As NMI value, use a different value for each MON to be assigned.
14. Parameters
TN : Tenant Number
MNO : Monitored Number (Max. 5 digits)
NMI : Monitored Number Index (1 ~ 4095)
UCD : Going by UCD when monitor status is not requested from AP
0: Not going by UCD
1: Going by UCD
STN : UCD Pilot Number (Max. 5 digits)
Note
[In the case of Hotel System]
A/G : Designation of Administration/Guest Room
A: For Administration
G: For Guest Room
Note:
Maximum 6 digits when using in a hotel system
15. Related Commands
List Up: LMNO